- Specs Summary
- Minimum Rating
( )
- Maximum Rating
( )
- Frequency
( )
- Speed
( )
Cat C280-8 Marine Generator Set
Cat C280-8 Marine Generator Set
-
Minimum Rating
( )
-
Maximum Rating
( )
-
Frequency
( )
-
Speed
( )
-
Aspiration
( )
-
Bore
11 in (280 mm)
-
Stroke
11.8 in (300 mm)
-
Displacement
9031 in³ (148 l)
-
Governor Type
( )
-
Fuel System
( )
-
Compression Ratio 50 Hz
( )
-
Compression Ratio 60 Hz
( )
-
Length
316.5 in (8040 mm)
-
Width
77.2 in (1961 mm)
-
Height
155 in (3937 mm)
-
Weight - Estimated
25000 lb (11340 kg)
-
Engine Model
( )
-
Emissions/Fuel Strategy
( )
Standard Equipment
Air Inlet System
- Aftercooler — fresh water, corrosion resistant coated (air side); air inlet shutoff; breather — crankcase, top-mounted; turbocharger — engine oil lubricated
Control System
- Single Caterpillar® A3 electronic control unit (ECU) with electronic unit injector fuel system, rigid wiring harness (10 amp, 24 volt power required to drive ECUs)
Cooling System
- Engine coolant water drains
Exhaust System
- Dry, gas tight, exhaust manifold
Fuel System
- Distillate fuel (requires viscosity ranging from 1.4 cSt to 20 cSt at 38° C), fuel transfer pump (mounted on left-hand side), duplex fuel filters, electronically controlled unit injectors
Lube Oil System
- Centrifugal oil filters with single shutoff, service side engine mounted on cylinder block inspection covers includes installed oil lines and single shutoff valve, filters centrifuge bypass oil from the main lubricating oil pump, can be serviced with the engine running, oil filler and dipstick valve, oil pressure regulating valves, crankcase explosion relief valves
General
- Caterpillar yellow paint; gear-driven pumps: fuel, oil, jacket water, aftercooler/oil cooler water; service literature
Optional Equipment
