Specifications
Engine
- Engine Model
- Cat® C15
- Bore
- 5.4in
- Stroke
- 6.75in
- Displacement
- 926in³
- No Engine De-rating Below
- 10000ft
- Peak Engine Torque Speed
- 1200r/min
- Peak Engine Torque Net (SAE J1349)
- 1670ft·lbf
- Net Power - SAE J1349
- 439HP
- Engine Model - U.S. EPA Tier 4 Final/EU Stage V
- Cat C15
- Gross Power - SAE J1995
- 452HP
- Net Power - ISO 14396
- 447HP
- Peak Engine Torque Gross (SAE J1995)
- 1711ft·lbf
- Emissions
- The C15 engine meets Tier 4 Final and Stage V emission standards.
- Note (4)
- Net power when the fan is at maximum speed is 327 kW (439 hp) per the SAE reference conditions.
- Note (2)
- The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard.
- Note (3)
- The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
- Note (1)
- The references to Tier 4 Final/Stage V include U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards.
- Note (5)
- DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard ISO 22241-1. Requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
Weights
- Rated Payload
- 40ton (US)
Body Capacities
- Heaped (SAE 2:1)
- 29.7yd³
- Struck
- 22.2yd³
- Tailgate Heaped SAE 2:1
- 31.9yd³
- Tailgate Struck
- 23.4yd³
Transmission
- Forward - 1
- 4mile/h
- Forward - 2
- 5.3mile/h
- Forward - 3
- 7.3mile/h
- Forward - 4
- 9.2mile/h
- Forward - 5
- 12.2mile/h
- Forward - 6
- 14.9mile/h
- Reverse - 1
- 4.2mile/h
- Reverse - 2
- 9.8mile/h
- Forward - 8
- 24.7mile/h
- Forward - 7
- 20.6mile/h
- Forward - 9
- 35.7mile/h
Service Refill Capacities
- Fuel Tank
- 145.3gal (US)
- Cooling System
- 23.7gal (US)
- Engine Crankcase
- 13.7gal (US)
- Axles - Each
- 15.8gal (US)
- Brake Cooling Tank
- 17.7gal (US)
- Transmission - OTG
- 19.8gal (US)
- DEF Tank
- 6.5gal (US)
- Steering/Hoist Hydraulic System
- 36.9gal (US)
- Final Drive - Each
- 1.3gal (US)
Sound Levels
- Interior Cab
- 72dB(A)
- Note (2)
- Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
- Note (1)
- The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the
Body Hoist
- Raise Time
- 12s
- Lower Time
- 12s
Standards
- Brakes
- ISO 3450 – 2011
- Cab - FOPS
- ISO 3449 Level II – 2005
- Cab - ROPS
- ISO 3471 – 2008
- Steering
- ISO 5010 – 2007
Operating Weights
- Center Axle - Empty
- 14636lb
- Rear Axle - Empty
- 14145lb
- Center Axle - Rated Load
- 37670lb
- Front Axle - Empty
- 42596lb
- Total - Empty
- 71377lb
- Center Axle - Loaded
- 51088lb
- Front Axle - Loaded
- 49723lb
- Total - Rated Load
- 80027lb
- Rear Axle - Rated Load
- 37670lb
- Rear Axle - Loaded
- 50594lb
- Front Axle - Rated Load
- 4687lb
- Total - Loaded
- 151405lb
Steering
- Lock to Lock
- 4.75 seconds @ 60 rpm
Body Plate
- Type
- High strength Brinell HB450 wear resistant steel
Turning Circle
- Turning Dimensions - SAE Turning Radius
- 303in
- Turning Dimensions - Clearance Radius
- 330in
- Turning Dimensions - Aisle Width
- 220in
- Note
- Dimensions are for machines equipped with 29.5 R25 tires.
- Turning Dimensions - Steer Angle - Left/Right
- 45°
- Turning Dimensions - Inside Radius
- 156in
Body Plate Thickness
- Side Plates
- 0.43in
- Base Plate
- 0.51in
- Front Plate
- 0.28in
Optimal Loader/Truck Pass Matching
- Note
- An optimum system match gives you a major productivity advantage. The 740 GC is an excellent match for the Cat 374F and 352F Hydraulic Excavators; and Cat 972M, 966M, and 962M Wheel Loaders. Having matched loading and hauling tools results in increased pr
- Wheel Loader: 972M - Passes
- 3
- Wheel Loader: 962M - Passes
- 5
- Wheel Loader: 966M - Passes
- 4–5
- Hydraulic Excavator: 374F - Passes
- 3–4
- Hydraulic Excavator: 352F - Passes
- 5–6